Lapierre e:i shock Manual De Utilización página 40

2. Failsafe Adjuster
• If the shock motor ceases to function (i.e. battery dies,
wire cut ...), it will remain in the mode it was in when it
stopped.
• To adjust the shock mode, use a 2 mm hex wrench on
the failsafe adjuster bolt to manually set the shock to
either the open or lock mode.
• If the failsafe adjuster bolt cannot be accessed, unbolt
the shaft eyelet according to your bicycle manufacturer's
instructions.
• Manually adjust the shock to either the open or lock
mode using the failsafe adjuster bolt, then reinstall the
shaft eyelet according to your bicycle manufacturer's
instructions.
39
E. OTHERS INFORMATIONS