Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the nailer. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
Battery Type
Actuating mode
Magazine angle
No load speed
Drive energy
Weight (bare tool)
Fasteners
Length
mm
Shank diameter
mm
Angle
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger
SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
This tool is a Bare unit but can be used with the batteries in
the following table.
SFMCB201
Battery
18
Voltage
V
DC
1.5
Capacity
Ah
Li-Ion
Type
14
(Original instructions)
SFMCN618 Type:1
V
DC
Sequential
/min
approx
kg
16 - 50
1.27
Straight
SFMCB12
SFMCB14
230
230
18
18
1.25
2
SFMCB202
SFMCB204
SFMCB206
18
18
2.0
4.0
Li-Ion
Li-Ion
Level of sound pressure according to EN60745:
Sound pressure (L
Sound power (L
WA
Vibration total values (triax vector sum) according to EN60745:
Staple nails (a
) 2.8 m/s
h
The Supply of Machinery (Safety) Regulations 2008
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN 60745-1:2009 + A11:2010; EN
18
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
Li-Ion
The Restriction of the Use of Certain Hazardous Substances
Straight
in Electrical and Electronic Equipment Regulations 2012, S.I.
9000
For more information, please contact STANLEY FATMAX at
50J
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
2.43
cal file and makes this declaration on behalf of STANLEY
230
EC declaration of conformity
18
4
18
STANLEY FATMAX declares that these products described
6.0
under 2006/42/EC; EN 60745-1:2009 + A11:2010; EN 60745-
Li-Ion
) 84 dB(A), uncertainty (K) 3 dB(A)
pA
) 95 dB(A), uncertainty (K) 3 dB(A)
2
2
, uncertainty (K) 1.8 m/s
Declaration of Conformity
SFMCN618 - Cordless Nailer
60745-2-16:2010.
S.I.2016/1091 (as amended).
2012/3032 (as amended).
FATMAX.
Director – Consumer Power Tools
STANLEY FATMAX, 270 Bath Road, Slough,
%
MACHINERY DIRECTIVE
SFMCN618 - Cordless Nailer
2-16:2010.
Karl Evans
Berkshire, SL1 4DX
United Kingdom
06/08/2019
Publicidad
