Publicidad
Idiomas disponibles
Idiomas disponibles
pull upwards.
Before using the appliance again, remember
to unwind the power cord completely. The up-
per hook rotates 360°. To unwind the power
cord, pull the hook and turn it.
1
2.3 Polti Vaporetto SV660/650/620_STYLE
has a dispenser located in the floor brush, to
be used exclusively with Polti Frescovapor,
the natural deodoriser that, besides leaving a
pleasant fragrance, captures bad odours. Polti
Frescovapor sold separately. To use Polti Fres-
covapor, proceed as described in Chapter 14.
2.4 Unwind the power cord completely and
connect it to an appropriate socket (6) which
is earthed.
1
2
Always use the product with the cord com-
pletely unwound.
The four LEDs on the control panel will light
up alternately (7). Wait until the "steam
ready" indicator light comes on
20 sec., steady light). At this point, the appli-
ance is ready.
Before starting the steam cleaning, it is good
practice to have previously swept or vacu-
umed the floor or the surface to be cleaned.
WARNING: When the hose is extracted with
the handle, the appliance automatically
switches OFF.
3.
USING THE ACCESSORIES
Accessories can be connected directly to the
Portable Steam Cleaner or to the flexible hose
for greater freedom of movement.
3.1
FLEXIBLE HOSE
To attach the flexible hose to the portable
cleaner, just connect them together (8). To re-
move the flexible hose, press the unlock but-
ton and pull outwards (8).
3.2 To connect the accessories directly to
the Portable Steam Cleaner or to the flexible
hose, just insert them on the point and turn
them until they lock (9).
4. STEAM ADJUSTMENT
There are 3 pre-set steam flow programs
available. Simply press the central Steam Reg-
ulation button on the control panel (7) until
the corresponding indicator light for the de-
360°
2
(around
sired program lights up.
• MIN (lowest level): to clean parquet and
laminate, delicate fabrics, upholstery, sofas
and mattresses, etc. and to steam plants.
• MED (medium level): to clean windows and
ceramic or porcelain tile floors, and to clean
and refresh rugs and carpets;
• MAX (highest level): to remove build-up,
stains, grease and to clean marble floors;
5.
CLEANING FLOORS
WARNING: Before steam treating surfac-
es (wood or laminate floors, carpets, rugs,
leather and fabrics and any surfaces espe-
cially those that are delicate or treated),
consult the surface manufacturer's or the
supplier/installer's instructions and always
perform a test on a section that is out of
view or on a sample. Allow the steamed
surface to dry to ensure that there is no de-
terioration, change of colour or deforma-
tion and that the surface stands up to the
temperature of the steam.
Before using the appliance on delicate sur-
faces, ensure that the part in contact with
the surface is free from foreign bodies that
could cause scratches.
It is good practice to sweep or vacuum the
floor first before steam cleaning it.
Ensure that the points in Chapters 1 and 2
have been performed.
5.1
Attach the cloth provided to the floor
brush. To make it easier to attach, the cloth
has an easy lock/release system to avoid hav-
ing to bend over and use your hands. Just
place the cleaning side of the cloth on the
floor and set the brush on top (10).
5.2 Unlock the appliance brush by tilting it
backward and using your foot.
5.3 Select the program type (7). For this type
of surface, we recommend medium (MED).
The appliance will start producing steam (the
tank will light up to indicate that the appliance
is producing steam). It is then possible to start
cleaning by moving the mop back and forth.
To stop producing steam, press the central
Steam Regulation button several times on the
control panel (7) until the light turns on
or hold it down for more than 2 seconds.
5.4 The brush has a flexible joint that makes
it easy to also clean corners and edges of fur-
niture and walls.
During cleaning, it is possible to insert the
power cord into the upper hook to prevent
it possibly getting in the way (11).
25
Publicidad
