Cherubini PLUG&PLAY SHORT RX Instrucciones página 34

This optional function enables the blinds to be moved to a first preferred middle position.
The first middle position is memorized as descent time starting from the upper limit switch.
SETTING FIRST MIDDLE POSITION
Procedure
1) Press the A+B buttons for at
least 2 s.
The motor will immediately perform a
brief confirmation movement and after
2 s will start again in ascent.
2) Wait for the blind to ascend
completely.
The motor is now running in dead man
mode, enabling the fine adjustment of
the first middle position.
3) Confirm the position by
pressing B for 2 s.
The motor will perform three (3)
confirmation movements.
MOVEMENT TO THE FIRST MIDDLE POSITION
Procedure
1) Give a long (>2 s) stop impulse
with the motor stopped.
After 2 seconds, the motor will perform
the movement into position.
DELETING THE FIRST MIDDLE POSITION
A
A
FIRST MIDDLE POSITION
+
B
+ B
4 sec
Command sequence
+
A B
A
+ B
2 sec
B
B
2 sec
Command sequence
.....
B
B
2 sec
.....
34
.....
Adjustment
Positioning