Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
The power washer
turns on for
2 seconds, shuts
off, and will not turn
back on. Do I have a
defective unit?
LIMITED WARRANTY
This product is under warranty to the original retail consumer against defects in material and workmanship
for a period of 1 (one) year and is a complete "bumper to bumper" warranty including the spray gun, the
high pressure hose and all accessories from the date of purchase. The warranty is not transferable or
assignable. This warranty covers replacement parts. This limited one year warranty applies only to products
used in consumer applications and is void in rental or any commercial application. Reasonable care must
be used in conformity with operation and maintenance instructions in the owner's manual and quick start
guide. Failure to follow these instructions will void this warranty. This warranty gives you specific legal rights
and you may also have other rights which vary from state to state.
Warranty Process
Keep your original receipt of purchase in case of warranty claim.
If your power washer develops a problem, contact Customer Service:
• Call our toll-free number at 1-866-235-5112. Customer Service is available Monday - Friday 8:00 a.m. to
5:00 p.m. Central Standard Time (CST). A Customer Service Representative will work with you to fix the
problem.
If the power washer needs to be returned for repair, shipping costs to the company must be paid by the
customer. A Return Merchandise Authorization (RMA) Number will be issued for the return. Upon receiving
the power washer, the company will repair or replace the unit. We will send unit back to customer at no
charge.
Please note: Power washers sent to the company without an RMA Number will NOT be accepted and will
be shipped back at the expense of the sender.
96646_IM_610_1350PSI_ENG-FR-SP_A5.indd 13
96646_IM_610_1350PSI_ENG-FR-SP_A5.indd 13
CORRECTIVE ACTION
1. It sounds like your power washer is working just fine. When the water is
connected, the accessories are assembled properly, and the power switch is
turned on, the power washer may turn on for 1 - 2 seconds to prime the pump. It
automatically shuts off and waits for the spray gun trigger to be pressed. When
the trigger is pressed, water starts flowing through the pump. The water sensor in
the pump "senses" the moving water and automatically turns the power washer
on.
2. Turn the power switch to off, hold in the trigger on the spray gun, so that you have
a steady stream of water. While you are holding the trigger open on the spray
gun, at the same time, turn the power switch on.
13
2023/2/17 上午10:45
2023/2/17 上午10:45
Publicidad
