Hunter Engineering Company Quick Check Drive Instrucciones Funcionamiento página 5

No user serviceable parts inside . Service is to be performed only by
Hunter factory authorized personnel .
For Class 3R lasers, avoid direct eye exposure and specular
reflections .
Do not stare into laser beam or view directly with optical instruments .
Do not allow laser light to be directed or reflected toward people or
reflective objects .
Do not operate the unit if it requires service or if protective covers
and housings are damaged .
Using this equipment in any manner other than specified by Hunter
may disable its safety features .
Save these instructions .
SAVE THESE INSTRUCTIONS
Decal Information and Placement
Front View
Decals 128-1787-2 indicates the locations of laser apertures .
Decal 128-1565-2 indicates laser radiation is present .
Laser apertures as indicated by yellow circles
Image 1.
Image 2.
The Class 3R laser apertures are located at the front faces .
CAUTION: Class 3R lasers are potentially hazardous
under direct and specular reflection if the eye is focused
and stable . They are hazardous if viewed with an optical
instrument .
English
Rear View
FDA standards for Class 3R laser compliance are shown on Decal
128-1786-2-08 .
Image 3.
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
655nm <5mW CW
EN/IEC 60825-1 2014 (2007 USA)
ÉVITER TOUTE EXPOSITION DIRECTE
PRODUIT LASER DE CLASSE 3R
655nm <5mW CW
Complies with FDA performance standards for
laser products except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
Conforme aux normes de performance de la
FDA pour les produits laser sauf les déviations
conformément à l'avis de laser no. 50 du 24
Image 4.
A manufacturer's identification label is also on the rear of each
tower .
MODEL NO.
PART NO.
VAC AMPS
PHASE
SERIAL
NO.
Image 5.
LASER LIGHT
RAYON LASER
AVEC LES YEUX
Juin, 2007.
128-1786-2-08
SERIAL NO.
HERTZ
3