Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
7
Align the hook on the back of the mirror (A)
with the receiving bracket on the main body
(B). Carefully lower the hook into the
receiving bracket.
WARNING: Make sure it feels fully
seated and secure before releasing the
mirror (A).
A
8
Re-install the screws (DD) on both sides as
shown.
DD
B
A
9
Operation
Back Light
•
The touch switch on the front of the mirror is
to turn the back light ON/OFF
•
When the back light is powered ON the button
color will glow Blue; when it is in standby mode
it will glow Red
Adjust Brightness of the Back Light
•
When the back light is powered ON, press and
hold the power button for approximately 3
seconds. The brightness will scroll up then
back down. Take your finger off the touch
button to leave the brightness at the setting
you choose. This brightness setting will be
retained in memory. To adjust the brightness
repeat the above steps.
Touch Switch
7
Lowes.com/allenandroth
Publicidad
