camry CR 6609 Manual De Uso página 4

19. Do not place the device on the gas or electric stove, near the wall, as well as in close
proximity to heat sources.
20. Do not use this device with charcoal or similar combustible materials.
21. Before cleaning, movement, dismantling, assembling and storing the grill: Turn off the
device, disconnect it from the mains and wait until the grill will cool down.
22. Accessible surface temperatures can be high when the appliance is
operating. Never touch the hot surfaces of the appliance.
23. Never carry the device when it is turned on or when it is hot.
24. Do not place the device under kitchen shelves, due to the rising heat and steam.
25. The power cord can not be laid over the device, and should not touch or be near hot
surfaces. Do not place the device under an electrical socket.
26. Clean the unit after each use.
27. Do not use the appliance with wet hands.
28. Do not touch the surface of the device with any sharp objects (eg. a knife)
29. Do not cover the heating plate with aluminium foil , etc., as this can cause
cummulation of heat and damage the plastic parts and coating.
30. Do not put utensils on the heating plates during use. Grill should be opened with a
handle or grip according to the model.
31. Do not use plastic utensils when handling the grill, it can melt.
DEVICE DESCRIPTION
1. Cover handle
3. Power LED indicator
5. Cover lock
INSTRUCTIONS FOR USE
1. Make sure that both plates are clean. Wipe the grill with a damp cloth if needed.
2. Place the grill on a dry, flat surface and connect to the power source. The power LED indicator (3) will turn on.
CAUTION: The first time it is turned on, the grill may produce a small amount of smoke caused by some parts heating up. This is
normal. Suggestion: leave the grill on for a few minutes to get rid of the factory smell.
3. Wait approximately 10 minutes for the grill to heat up to reach the temperature suitable for grilled food. Adjust the temperature using
the knob (2). While waiting, you can prepare food for grilling.
4. Put a container underneath the front of the grill and close it.
5. Fully open the cover by grasping the handle (1) and distribute the food evenly on the surface of the plate.
6. Grasp the cover handle (1) of the grill and close it.
7. Grilling time takes a few minutes and depends on the food used for grilling.
8. While grilling, the thermostat LED indicator (4) will go on and off - the thermostat maintains the desired temperature of the heating
plates.
9. Open the top cover and remove the grilled food with a plastic spatula supplied with the set. CAUTION: Do not use metal utensils or
sharp kitchen tools; they can damage the heating plates.
10. Before inserting the next batch of food to be grilled, close the cover so that he heating plates reach the suitable temperature. When
the thermostat LED indicator (4) turns off, the grill is ready to use.
11. When done, unplug the grill from the power source and allow it to cool down.
CLEANING AND MAINTENANCE
1. Before cleaning the grill, make sure that it is cool to the touch and that is disconnected from the power source.
2. Regularly clean the outer surfaces of the grill with a soft sponge dampened with gentle soap and water. Then wipe the grill with a
damp sponge. Do not wash the grill under running water.
3. Clean the heating plates with the oven cleaning liquid.
When done cleaning, wipe the cleaned elements dry.
TECHNICAL DATA:
Power source: 220-240V ~50/60Hz
Power: 2000W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance
should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
2. Temperature control knob
4. Thermostat LED indicator
6. Fat removal channel
Device is made in class I of insulation and has to be connected only to power outlet with ground circuit.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
DEUTSCH
DEUTSCH
4