Aventics RTC 16 Instrucciones De Servicio página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 61
AVENTICS | RTC/CKP | R402003540–BAL–001–AG | English
RTC, CKP – Mounting the foot mountings
Mounting the foot mountings, RTC series
Mounting the foot mountings, CKP series
1. Place the cylinder on a firm, flat surface.
2. Lay out the foot mountings with one pair at each end
and the others evenly distributed on both sides along
the length of the cylinder (see above for distances).
3. Attach each foot mounting to the mounting surface
with one (1), two (2) or four (3) suitable screws.
4. Tighten the screws alternately and gradually to avoid
tensions (see table 2 for tightening torque).
Tab. 2: Tightening torque, foot mountings
Cylinder version
Piston size (mm)
Screw Ø
Tightening torque
(grade 8.8)
Cylinder version
Piston size (mm)
Screw Ø
Tightening torque
(grade 8.8)
2
4x
2x
3
2
CKP
CKP
CKP
16
25, 32
25, 32
M4
M5
M6
3 Nm
6 Nm
10 Nm
RTC
RTC
RTC
16...25
32...40
50...63
M6
M8
M12
10 Nm
24 Nm
81 Nm
Alternative mountings
Alternative mounting of the RTC-CG and RTC-HD
cylinders
1
1x
Alternative mounting of RTC-CG and RTC-HD
On the RTC-CG and RTC-HD cylinders the foot mountings
can be replaced with square nuts (piston size 16 mm) or
1
sliding blocks (piston size 25 mm) positioned in the slot on
the underside of the cylinder.
O Position the square nuts or the sliding blocks evenly
distributed along the length of the cylinder and on the
same recommended distance as the foot mountings.
If the screw diameter used is smaller than in the
foot mountings this has to be compensated for with
more screws.
Alternative mounting of the CKP cylinder
1
2
Alternative mounting of the CKP cylinder
CKP cylinders can be mounted with the slide (1) against
the mounting surface in the same way as the cylinder body
(2) is mounted to the surface.
20

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rtc 25Rtc 32Rtc 40Ckp 16Ckp 25Ckp 32 ... Mostrar todo

Tabla de contenido