Publicidad
Idiomas disponibles
Idiomas disponibles
3. "
" MODE KEY
EN
Press this key to select mode. The sequence is normal, natural, and sleep when this
key being touched repeatedly or continuously. The light indicate mode state.
4. "
" OSC/LOUVER KEY
After the fan has started, press this key to select oscillation mode. The lights on the
display can indicate fan oscillation mode.
5. "
" TIMING KEY
Press this timer key repeatedly to s et the time for air delivery.
Increase in increments up to "1-2-3-4-5-6-7" hours.Fig.5
b. BATTERIES
(battery not included in the packaging)
(1) Slide the battery compartment Cover.
(2) Insert the batteries, and make sure that the batteries are
placed as shown in the Fig.5.
(3) Slide back the battery cover.
NOTES: Use size "AAA" manganese or alkaline batteries. Do not
use rechargeable batteries.
c. BATTERY WARNING AS BELOW
1. "Do not dispose of batteries in fire, batteries may explode or leak."
2. -Do not mix old and new batteries.
3. -Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
d. REMOTE CONTROLLER OPERATION
Point the remote controller at the receptor on body of the fan and press the desired
button. The remote controller will work at distances of up to roughly five meters and
the angle of 30 degree included between right and left from the receptor.
The batteries must be removed from the remote controller before it is scrapped and
that they are disposed of safely.
e. OVERHEAT PROTECTION OF THE MOTOR
The windings of the motor have a thermal-fuse that burns out and the fan switches
off and temperature of the motor is no longer going up so that plastic parts of the fan
don't subject to deformation so far so to be burned by the overheat if the motor is
overheat for any unexpected reason.
II. Buttons on fan body / Panel indication (Fig.6)
The buttons on the body such as ON/OFF,SPEED, MODE,TIMER,
OSCILLATION have the same functions as those of the corresponding
keys on the remote controller.
Fig.5
Fig.6
Publicidad
