Descargar Imprimir esta página

AEG AGN71800F0 Manual De Instrucciones página 23

Ocultar thumbs Ver también para AGN71800F0:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Problem
The Alarm light
flashes.
The compressor op-
erates continually.
The temperature in
the freezer is too
low.
The temperature in
the freezer is too
high.
Possible cause
The appliance has no
power. There is no volt-
age in the mains socket.
The temperature in the
freezer is too high.
The temperature is not
set correctly.
The door is not closed
correctly.
The door has been
opened too frequently.
The product temperature
is too high.
The room temperature is
too high.
The FROSTMATIC func-
tion is switched on.
The temperature regula-
tor is not set correctly.
The FROSTMATIC func-
tion is switched on.
The temperature regula-
tor is not set correctly.
The door is not closed
correctly.
The product temperature
is too high.
Many products are stored
at the same time.
Products are too near to
each other.
ENGLISH
Solution
Connect a different electri-
cal appliance to the mains
socket.
Contact a qualified electri-
cian.
Refer to "High tempera-
ture alarm"
Set a higher temperature.
Refer to "Closing the
door".
Do not keep the door
open longer than necessa-
ry.
Let the product tempera-
ture decrease to room
temperature before stor-
age.
Decrease the room tem-
perature.
Refer to "FROSTMATIC
function".
Set a higher temperature.
Refer to "FROSTMATIC
function".
Set a lower temperature.
Refer to "Closing the
door".
Let the product tempera-
ture decrease to room
temperature before stor-
age.
Store less products at the
same time.
Store products so that
there is cold air circulation.
23

Publicidad

loading