Regulation With Constant Differential Pressure - DAB PUMPS EVOPLUS 40/180 M Instrucciones Para La Instalación Y El Mantenimiento

Never remove the cover if the yellow light is lit.
Red light: Warning of an alarm/malfunction present in the system.
If the light is blinking it is a non-blocking alarm and the pump can still be controlled. If
the light is fixed it is a blocking alarm and the pump cannot be controlled.
Green light: Pump ON/OFF signal.
if lit, the pump is running. If off, the pump is stopped..
10. MENUS
EVOPLUS SMALL circulators offer a user menu accessible from the Home Page by
pressing and releasing the central "Menu" button.
Below are shown the user menu pages with which it is possible to check the system
status and modify its settings.
If the menu pages show a key at bottom left it means that it is not possible to change
the settings. To unblock the menus go to the Home Page and press the hidden button
and the button under the key at the same time until the key disappears.
If no button is pressed for 60 minutes, the settings are automatically blocked and
the display switches off. When any button is pressed the display lights up again
and the "Home Page" appears.
To navigate in the menus, press the central button.
To return to the previous page, hold down the hidden button, then press and release
the central button.
To modify the settings use the left and right buttons.
To confirm the change of a setting, hold down the central button "OK" for 3 seconds.
Confirmation will be indicated by the following icon:
Home Page
The main settings of the system are graphically
summed up on the Home Page.
The icon at top left indicates the type of regulation
selected.
The icon at centre top indicates the operating
mode selected (auto or economy).
The icon at top right indicates the presence of a
single or twin inverter. The rotation of the icon
ENGLISH-
Page 1.0
Page 2.0
Page 2.0 displays 3 icons which represent:
- central icon = setting currently selected;
- right icon = next setting;
- left icon = previous setting.
13
or indicates which circulation pump
is operating.
At the centre of the Home Page is a read-only
parameter which can be chosen from a small set
of parameters on Page 9.0 of the menu.
From the Home Page it is possible to access the
page for regulating the contrast of the display: hold
down the hidden button, then press and release
the right button.
EVOPLUS SMALL circulators offer a user menu
accessible from the Home Page by pressing and
releasing the central "Menu" button.
The factory settings are set from Page 1.0 by
holding down the left and right buttons at the same
time for 3 seconds.
The resetting of the factory settings will be notified
by the appearance of the symbol next to the
word "Default"
The regulating mode is set from Page 2.0. You
can choose between the following modes:
1 = Proportional differential pressure
regulation.
2 = Regulation with constant differential
pressure.
3 = Regulation with constant curve with
rotation speed set from the display.