Publicidad
Idiomas disponibles
Idiomas disponibles
Tips for shaving/trimming
• Clean your face before shaving to remove any dirt or grease
from the skin. This will reduce skin irritation and make the shave
feel more pleasant.
• Apply light pressure and shave in circular motions to keep skin
irritation to a minimum.
• Shave the most awkward areas first, such as under the nose
and along the jawline. This is because the shaver heads are
still cool at the start of the shave, and if you need to shave
over these awkward areas multiple times, the shaver heads
may have warmed up towards the end of your shave and this
can feel unpleasant.
• Try to stretch the skin being shaved using your fingers.
• The shorter the beard hair is, the more effectively the rotary
shaver will shave.
• If you switch from wet to dry shaving (or vice versa), it may take
up to 3 weeks for your skin to get used to the new method.
Shaving with the shaver heads
Before you start shaving, make sure that the shaver is charged
(see section "Charging the battery").
1. Make sure that the shaver unit is securely attached to the
device.
2. Remove the shaver head protective cover if it is still attached.
3. Press the ON/OFF switch
battery indicator starts to light up and displays the remaining
battery capacity in percent.
4. Apply light pressure as you move the shaver heads in circular
motions across the areas of the face to be shaved.
5. When you have shaved all the required areas of your face,
switch the shaver off. Press the ON/OFF switch
off the shaver.
to switch on the shaver. The
34
to switch
Publicidad
