Parkside PAAS 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 24

GB MT
Safety information
Familiarise yourself with all the op-
erating elements before working
with the device. Practise handling the de-
vice and have the functionality, mode of
action and working techniques explained
to you by an experienced user or an ex-
pert. Make sure that you are able to switch
off the device immediately in case of an
emergency. Improper use of the device can
cause severe injury.
Symbols used in the
instruction manual
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock
Hazard symbol with information on
damage prevention
Advisory symbol with information
on how to best use the device
Symbols on the device
Read the instruction manual.
Wear eye protection.
Do not use the device in the rain or
on wet hedges.
Caution! Risk of injury from moving
blades
24
On/Off switch
+ Green LED
To start, operate the start
handle twice within
0.8 seconds
Electrical devices must not be dis-
posed of with domestic waste.
The device is part of the X 20
V TEAM from Parkside
General safety instructions
for power tools
WARNING! Read all safety no-
tices, instructions, illustrations
and technical data that have
been provided with this power
tool. Failure to comply with the fol-
lowing instructions may result in elec-
tric shock, fi re and/or serious injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of fl ammable Iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.