Descargar Imprimir esta página

Parkside PAGS 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 31

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 133
Checking the charge
status of the battery
The battery charge level indicator (14) on
the battery (13) shows the charge level.
Press the button (15) for the charge level
indicator on the device. The charge level
of the battery is indicated by illumination
of the corresponding LED light.
3 LEDs are on (red, yellow, green):
Battery charged
2 LEDs are on (red, yellow):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
General working
instructions
Check the device before each use for
obvious defects such as loose, worn or
damaged parts.
Comply with the device's maintenance
and cleaning instructions.
Using the device as grass
shears/shrub shears
Ensure objects such as wire, metal-
lic parts, stones etc. do not enter
the blades while trimming. This can
cause damage to the cutting unit.
If the blades become jammed with
solid objects, turn the device off
immediately.
Ensure that the screws in the blade bar
are fi rmly in place.
Only use sharp blades to ensure good
trimming performance and to protect
the device and rechargeable battery.
Do not overload the device while wor-
king to such an extent that it comes to
a standstill.
Working using the grass shears
Grass is best cut when it is dry and not
too high.
Working using the shrub shears
Move the device in a steady forward
motion, or up and down in an arch-sha-
ped motion.
The double-sided blade bar enables trim-
ming in both directions, or via pendulum
movements from one side to the other.
Cleaning/Maintenance
Leave any work not covered
in this manual to our Service
Centre. Only use original
parts. There is a risk of injury!
Remove the battery before all
maintenance work. There is a
risk of injury.
Never use cleaning agents or sol-
vents, which can cause irreparable
damage to the unit. Chemicals can
attack the plastic components on
the unit.
Wear gloves when handling the
blades (
injury from cuts!
Clean and service the unit regularly as
follows. This guarantees a long life for your
unit:
GB
5/9). There is a risk of
MT
31

Publicidad

loading