Urmet 1760 Manual De Uso página 14

1.1 TURNING ON THE DISPLAY AND ENABLING VOICE COMMANDS
Idle (display off)
• In the video door phone area say the voice command "Hey Urmet".
1.2 VOICE ACTIVATION
It is possible to activate voice mode in the following 2 ways:
1. Waiting for a response (while receiving a call)
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Answer the call"
– "Connect the call"
– "Pick up"
The video door phone says the following voice message " Call connected" to confirm the reception of
the voice command.
2. In auto-on mode
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Autoinsertion"
– "Show cameras"
– "Start autoinsertion"
The video door phone says the following voice message "Showing cameras" to confirm the reception
of the voice command.
• Say the voice command "Hey Urmet" again.
• Finally, say one of the following voice commands
– "Activate audio"
– "I want to speak"
– "Turn microphone on"
The video door phone says the following voice message "Bidirectional audio on" to confirm the reception
of the voice command.
1.3 ENDING THE CONVERSATION
In voice mode
• Pass with your hand once in front of the video door phone IR detector during the conversation.
• Then say one of the following voice commands:
– "Close the call"
– "Close"
– "Terminate"
The video door phone says the following voice message "The call is over" to confirm the reception of
the voice command.
1.4 PEDESTRIAN DOOR OPENING
It is possible to open the door in the following 2 ways:
1. Idle (display off)
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Open door"
– "Open"
– "Open the door"
The video door phone says the following voice message "Opening door" to confirm the reception of the
voice command.
14
DS1760-037