Ryobi ERO-2412V Manual De Utilización página 8

GB
F D
IMPORTANT
READ THESE SAFETY INSTRUCTIONS
Before using the RO sander, please read the manual
carefully, especially the safety instructions.
Keep this manual for future reference.
GENERAL SAFETY RULES
Guard against electric shock. Avoid body contact
with earthed or grounded surfaces (e.g.) pipes,
radiators, ranges, refrigerators).
Keep children away. Do not let visitors touch the tool
or extension cord. All visitors should be kept away
from area.
Store idle tools. When not in use, tools should be
stored in a dry, high or locked up place, out of reach
of children.
Do not force the tool. It will do the job better and
safer at the rate for which it was intended.
Use the right tool. Do not force small tools or
attachments to do the job of a heavy duty tool. Do not
use tools for purposes not intended; for example, do
not use circular saws to cut tree limbs or logs.
Dress properly. Do not wear loose clothing or
jewellery, they can be caught in moving parts. Rubber
gloves and nonskid footwear are recommanded when
working outdoors. Wear protecting hair covering to
contain long hair.
Use safety glasses. Also use face or dust mask if
the cutting operation is dusty.
Connect dust extraction equipment. If devices are
provided for the connection of dust extraction and
collection facilities ensure these are connected and
properly used.
Do not abuse the cord. Never carry the tool by the
cord or yank it to disconnect it from the socket. Keep
the cord away from the socket. Keep the cord away
from heat, oil and sharp edges.
Secure work. Use clamps or a vice to hold the work,
it is safer than using your hand and it frees both
hands to operate the tool.
Do not overreach. Keep proper footing and balance
at all times.
Maintain tool with care. Keep cutting tools sharp
and clean for better and safer performance. Follow
instructions for lubrication and changing accessories.
Inspect tool cord periodically and if damaged have it
repaired by an authorized service facility. Inspect
extension cords periodically and replace, if damaged.
Keep handles dry, clean and free from oil and grease.
E I P NL S DK N FIN
English
Disconnect tools. When not in use, before servicing
and when changing accessories such as blades, bits
and cutters.
Remove adjusting keys and wrenches. Form the
habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning it on.
Use outdoor extension leads. When tool is used
outdoors, use only extension cords intended for
outdoor use.
Stay alert. Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
Replace damaged cords immediately. Use of
damaged cords can shock, burn or electrocute.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, free running of moving
parts, breakage of parts, mounting and any other part
that is damaged should be properly repaired or
replaced by an authorized service center unless
otherwise indicated in this instruction manual. Have
defective switches replaced by an authorized service
facility. Do not use the tool if the switch does not turn
it on and off.
WARNING
The use of any accessory or attachment, other
than those recommended in this instruction
manual, may present a risk of personal injury.
Have your tool repaired by a qualified person.
This electric tools in accordance with the relevant safety
requirements. Repairs should only be carried out by qualified
persons using original spare parts otherwise this may result
in considerable danger to the user.
SPECIFIC SAFETY RULES FOR SANDERS
Always wear safety goggles and a dust mask
when sanding, especially sanding over-head.
The machine is not suitable for wet sanding.
Do not use sanding paper larger than needed.
Extra paper extending beyound the sanding pad can
also cause serious lacerations.
The dust bag shall be equipped with the tool.
And it shall be emptied frequently. To connect dust bag,
insert the adapter of dust bag to the dust-collection
opening on the rear end of the sander. And screw the
adapter clockwise until the connection is credible.
Disconnect the bag in the reverse order.
5
GR H CZ RUS RO PL