Publicidad
Idiomas disponibles
Idiomas disponibles
Play With Bluetooth Device
You can listen to music from a Bluetooth-enable
device via this player.
Pair the Bluetooth-enabled devices
The first time you connect your Bluetooth device to
this player, you need to pair your device to this player.
Note:
- The operational range between this player and a
Bluetooth device is approximately 8 meters.
- Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
- Keep this player away from any other electronic
device that may cause
interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to Bluetooth.
3. Press and hold "
/
" button on remote control
for seconds to activate Bluetooth pairing mode,
icon blinking.
4. Search for Bluetooth device with your device.
5. Select "BLUEPORT" in the pairing list.
6. Enter default password "0000" if necessary the
pairing succeeds,
icon stop blinking and light on.
7. To disconnect connection, turn off the Bluetooth
function on your device or switch the player to other
source.
Tip
- If there's a connection exist, hold and press "
button on remote control for seconds will re-activate
the pairing mode, the connection will be interrupted.
- If there's no other Bluetooth device pair with
this player in two minutes, the player will recovery
previous connection.
- The player will also be disconnected when your
device is moved beyond the operational range.
- If you want to reconnect your device to this player,
place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check if the
device is still connected with the player.
16
All manuals and user guides at all-guides.com
- If they are connected, display panel shows "BLU T".
- If the connection is lost, display panel shows "NO
BT", follow the instruction above to pair your device
to the player again.
Listen to music from Bluetooth device
Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the
player.
Control Profile (AVRCP) profile, you can use the
player's remote control to play music stored on the
device.
1. Pair your device with the player.
2. Start play music via your device (if it support
A2DP)
3. Use supplied remote control to control play (if it
support AVRCP)
- To pause/resume play, press the
- To skip to a track, press the
Adjust Volume Level
During play, press and drag the +/- buttons to
increase/decrease the volume level.
/
"
Mute Sound
During play, press the MUTE button to mute or
restore sound. Press this button again or -/+ buttons
to cancel the effect.
If the connected Bluetooth device supports
If the device also supports Audio Video Remote
iPod/iPhone/iPad Speaker Bluetooth
/
button.
buttons.
Publicidad
