Manuales relacionados para White’s Electronics TREASUREpro
Resumen de contenidos para White’s Electronics TREASUREpro
- Página 1 TREASUREmaster ® TREASUREpro Owner’s Manual Manufactured in Sweet Home, Oregon USA White’s Electronics, Inc. 1011 Pleasant Valley Road Sweet Home, Oregon 97386...
-
Página 3: Tabla De Contenido
Introduction Thank you for choosing White’s metal detecting products. White’s TREASUREmaster® and TREASUREpro are our newest, lightweight, easy-to-use metal detectors. They are designed and built with the latest electronics technology, used to locate metal objects in the ground and provide the user with the infor- mation to help decide if that object has potential value worth digging for. -
Página 5: Assembly
Assembly 1. Remove all parts from the shipping carton and check assem- bly diagram to ensure all parts are present. 2. Install black rubber washers on fiber lower rod; attach lower rod onto search coil ears. Use only the nonmetallic washers, fiber bolt, and fiber thumbnut to secure search coil loop to the lower fiber rod, only finger tight (do not use tools). -
Página 6: Batteries
Batteries The TREASUREmaster® and TREASUREpro operate for up to 20 hours (without backlight) using two quality “AA” batteries. 1. Open the battery compartment door by gently pushing up on the battery tabs on the back of the display and hinge open the battery compartment door. -
Página 7: Display & Controls
Backlight TREASUREpro only 1. Power: ON/OFF. Quick presses of the button toggle Backlight on and off (TREASUREpro only). 2. (+)/(-): Selects the level or setting of the particular option selected using the options controls. During normal search & (-) adjust Sensitivity. -
Página 8: Sensitivity
Sensitivity Used to increase or decrease responsiveness to targets, ground, and external electrical noise. By finding the highest setting that performs in your area, maximum depth can be achieved. Settings 1–8 are available. Reduced sensitivity is often needed to search bad ground con- ditions or high electrical activity areas. -
Página 9: Tone Identification
While most people prefer Silent Search, the optional continuous threshold can be used to alert an operator to rejected targets and ground peculiarities. Tone Identification The pitch or audio frequency produced by each target’s display identification range can be highlighted with differently pitched sounds, called Tone Identification. -
Página 10: Ground Balance
/normal ground where ground mineral changes are naturally occurring and gradual. TREASUREPro- Spotty high ground minerals (naturally occur- ring or not), mixed in with lower mineral, can cause the ground tracking to error resulting in instability and difficulties (as if the sensitivity was set too high for the area). -
Página 11: Depth Units
Again, Discrimination and Sensitivity are the only way to deal with these metal type responses. The TREASUREpro captures ground mineral information in real time. Thus, turning off the Power and turning back ON, will automatically unlock a locked ground balance level. This is necessary to capture new ground information. -
Página 12: Backlight
Backlight The TREASUREpro has a backlit display option for use in low-light conditions. Backlight use will reduce battery life, but may be necessary in some conditions. Tap the Power button momentarily to select Backlight. Searching Sweep the search coil smoothly and evenly from side to side, as if mopping a floor, about 2 seconds per pass, overlapping each pass 50%. -
Página 13: Digging
Digging Different terrains require different types of digging tools and digging techniques. • On sandy beaches any simple strainer type scoop works fast and easily to recover targets. • In grass or turf, a trowel or knife like tool works best. It can be combined with the hinged door digging method. - Página 14 Any stereo headphone between 8 and 150 ohms will work. 2. Carry Cases- White’s offers backpacks and gun-style cases to fit both the TREASUREmaster® and TREASUREpro. These padded cases offer convenience for storage and protection for travel. 3. Search Coils- The standard search coil is the best for all- around use.
- Página 15 Warranty If within two years (24 months) from the original date of purchase, your White’s detector fails due to defects in either materials or workmanship, White’s will repair or replace, at its option, all neces- sary parts without charge for parts or labor. Simply return the complete detector to the Dealer where you purchased it or to your nearest Authorized Service Center.
- Página 16 Printed in the USA 8/15 All rights reserved. ©White’s Electronics, Inc. 621-0552...
- Página 17 Press Option again to return to normal searching. Restore to Factory Settings TREASUREmaster® - Power on the detector while holding down the Options button until “Fd” appears in the VDI area. TREASUREpro- Navigate to the RESET command in the menu and press the Pinpoint button.
- Página 18 Discrimination The Treasuremasters have the ability to accept or reject metal types based on their conductivity and/or electrical phase. Target conductivity/phase is indicated on the display VDI scale (Visual Discrimination Indication) with a VDI reference number. By learning what targets consistently indicate specific VDI num- bers, you can be sure to accept or reject the different target VDI ranges that interest you.
- Página 19 The TREASUREmaster® has 8 rejection ranges and the TREASUREpro has 16 rejection ranges. Discrimination comes already set up for the Program you have selected. To Customize Discrimination: It is sometimes necessary to customize discrimination for targets you want to accept/reject.
- Página 20 Volume Volume adjusts how loudly a metal target beeps. The Treasure- masters provide adequate volume levels for individuals with good hearing. Those with declining or impaired hearing should use headphones with the Treasuremaster models. With head- phones, Treasuremaster volume is maximized. To Adjust Volume: 1.