Publicidad
Idiomas disponibles
Idiomas disponibles
HULK550DC
Opening your life
Code:
Dear customers, In order to ensure your personal and property safety, please ensure that this product is in normal use, please read the instructions
carefully before installing and using the motor. Adjustments, repairs and maintenance require quali ed or certified personnel to operate, and
perform annual reviews. Otherwise it will a ect the life of the shutter motor and the stability during the operation of the roller shutter, if you have
any problems during installation or use, please contact our company.
- Our company achieved the International Certi cation of Quality Management System ISO 9001-2000.
- Patent number of the new chain adjustment mechanism: ZL2004 2 0087351.2
- Chain break protection device patent number: ZL02240227.6
Safety precautions:
- The roller shutter motor must be rmly grounded, to prevent electric shock;
- Adjust the hand chain quadrant between 3-6mm (adjust it before installing the shutter);
- Do not allow users to manipulate the motor after connecting it;
- The control box must be installed on a wall free of moisture at least 1.5 meters. Do not allow children to press the buttons and remote control;
- The input power cable of the shutter motor must be more than 1.5mm, and in accordance with the electrical construction standard for wire
layout.
- Do not allow people or objects to pass under the door when it is in operation;
- It is prohibited to install this motor in an area that has ammable or highly explosive objects;
- Pay attention to the presence of humidity and accumulated rain, avoid short circuits in the electrical part of the motor, and the shutter motor
breaking;
- After installing and debugging, the drive chain needs to be suitable for adding lubricant, later on it will need to use lubricant regularly.
- When you install and use the motor you will need to connect it to a 110V - 60Hz source (Please check that the indicator light on the control box
is on).
- When the motor is using the battery, if you notice that the lifting speed is very slow or you see the low voltage indicator light on, please recharge
the battery and use it again.
- If it is not going to be used for a long time, before cutting o the charging power, please do a large enough recharge rst, and pull out the battery
fuse (the battery needs charging for 3 months, don't forget to insert the battery fuse). battery before charging).
- Do not allow the operation of this appliance without the use of this manual.
- Please keep this manual for future reference on engine maintenance.
- The shutter motor must be installed 2.5 meters above the ground or in an easily accessible corridor.
- Go to qualified personnel to change the battery.
www.accessmatic.com
Opening your life
Publicidad
