ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Capacities
Overall length
Rated voltage
Net weight
*1. Without nozzles.
*2. With nozzle.
*3. With garden nozzle.
*4. With nozzle and battery cartridge (BL1041B), and without dust bag.
*5. With garden nozzle and battery cartridge (BL1041B), and without dust bag.
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
Do not operate power tools in explosive atmo-
2.
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Air volume *1
Air speed (average)
Air speed (max.)
With nozzle
With garden nozzle
BU01
0 - 2.6 m
0 - 62 m/s (0 - 139 MPH) *2
0 - 75 m/s (0 - 168 MPH) *2
508 mm (20") *4
D.C. 10.8 V - 12 V max
1.4 - 1.9 kg (3.1 - 4.2 lbs)
-
BL1016 / BL1021B / BL1041B
DC10SB / DC10WD / DC18RE
Keep children and bystanders away while
3.
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
2 ENGLISH
BU02
3
/min (0 - 92 cu.ft./min)
0 - 45 m/s (0 - 101 MPH) *3
0 - 56 m/s (0 - 125 MPH) *3
852 mm (33-1/2") *5
-
1.4 - 1.9 kg (3.1 - 4.2 lbs)