cecotec BONGO M30 CONNECTED Manual De Instrucciones página 63

Folded
Fig. 27
The scooter must be switched off before folding.
Hold the handlebar stem, turn it counterclockwise to open the safety hook and lift the
1.
quick release lever.
2. Align the bell and hook and engage. When opened, unhook the bell lever from the
mudguard hook.
Unfold the handlebar stem, lock the quick release lever and rotate the handle bar
3.
clockwise to close the safety hook.
Transport
Hold the handlebar stem with one or both hands.
Adjusting the handlebar
Fig. 28
a. Inner hexagon nut
b. Hexagonal bolt
Hexagon nut
c.
Prolonged use of the scooter can cause the screws to loosen and the handlebar stem to
become unstable. If you notice that the handlebar stem wobbles when riding, follow the steps
below.
Tools
I: 8-10 mm spanner II: 4 mm Allen key
Note: These tools must be in the user's possession.
Steps
With the scooter folded, use tool I to loosen "c" (clockwise).
1.
Use tool I to loosen "b" (clockwise).
2.
3. Use tool II to adjust "a" (clockwise) to the proper position, and use tool I to tighten "b"
(counterclockwise).
Lift the handlebar, close the quick release lever and turn the handlebar clockwise to close
4.
the safety hook.
5. Shake the handlebar stem to see if the problem has been resolved. If not, repeat steps 2
and 3.
If resolved, continue to step 6.
6.
Fold the scooter again and use tool I to tighten "c" (counterclockwise).
7.
* Step 6 is mandatory.
BONGO SERIE M30 CONNECTED
ENGLISH
63