Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARING TO CLEAN
IMPORTANT CLEANING TIPS:
1. Pick up and discard any solid debris.
2. Vacuum/clean area with a dry vacuum before spot cleaning.
3. Always test inconspicuous area with small amount of cleaner before using.
1
Remove Clean
Water Tank
Lift straight up and
away from Machine.
3
Add Hot Water
Add hot tap water, filling
to the "Clean Water" line
marked on the tank.
DO NOT BOIL OR
MICROWAVE WATER.
5
Replace The Cap
Insert the tube back
into the Clean Water
Tank. Replace the outer
cap turning clockwise
and tighten.
DO NOT USE BOILED OR MICROWAVED WATER IN EITHER TANK. Doing so
could result in scalding or burns. Not recommended for use on wool, jute, sisal or
other natural fiber carpets and rugs. Doing so could result in damage to material
and void warranty on Machine. Do not walk on wet carpet. Do not use or place
Machine on wood, laminate, or natural fiber floors.
8
R U G D O C T O R P E T P O R T A B L E S P O T C L E A N E R
2
Unscrew The Cap
Unscrew the cap turning
counter clockwise.
Remove the cap and pull the
tube from the Clean Water Tank.
4
Add Cleaning Solution
Add Rug Doctor cleaning solution
to the hot tap water, filling to the
"Soap" line marked on the Clean
Water Tank. Recommended use is
4oz per 1 gallon. You will only need
2oz per use (tank size is 1/2 gallon).
6
Replace Clean
Water Tank
Replace the tank by setting
it straight down into the
Machine, pressing down
firmly until secure.
|
U s e r M a n u a l
Publicidad
