Btwin LD920E 2023 Manual Del Usuario página 15

PRODUCT DESCRIPTION
ELECTRICALLY-ASSISTED BIKE TECHNICAL FEATURES
A
BATTERY
B
CENTRAL MOTOR
C
REMOTE AND DISPLAY
GENERAL OPERATION OF THE ELECTRICAL ASSISTANCE
The power assisted bike can be used with or without assistance by pressing the buttons up/down on the remote «C» and altering the modes ECO-TOUR-TURBO-OFF. The selectable ECO-TOUR-TURBO-OFF
assistance modes selectable on the remote button «C» allow you to choose a power assist level in addition to the effort provided. Power assistance will only work if you are pedalling, with a selected mode other
than OFF. Assistance cuts off when the speed is above 25km/h. In case of intensive use and in exceptional climatic conditions, assistance may be cut off to safeguard the whole system.
The power supplied is calculated by the controller based on your pedalling and the assistance mode selected.
The central motor «B» will provide more or less power depending on the mode selected and the force applied.
Power assistance does not kick in or shuts down in the following situations:
- The speed is above 25km/h
- You're not pedalling
- The battery «A» remaining charge is not sufficient
- «OFF» is the power assistance mode selected
- When the display is switched off
C
A
B