Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Product description
Due to technological innovations, the product description in this manual may not completely match
your appliance. More detailed information corresponds to the final product.
Technical specifications
•
140mm magnet
•
1.5" subwoofer
•
15" + 15" tweeter
•
12V/12A Acid Battery
•
700W power
•
Wireless microphone included
•
TWS (connects up to
•
2 speakers at the same time)
•
Aux input (3.5-3.5mm)
•
USB/TF inputs
•
Bluetooth
•
2x microphone inputs
•
Guitar input
•
LED light
•
Response frequency 45hZ-22KHz
•
Input sensitivity ≤1V
•
Distortion ≤2%.
•
Signal/Noise ≥80dB
•
45x35.5x110cm
TWS Connection
TWS is a wireless pairing between two speakers in bluetooth mode.
When both speakers go into bluetooth mode, press and hold the TWS function key on either device for
3-5 seconds to enter TWS pairing mode. At this point, the two speakers will automatically pair and con-
nect. A successful pairing sound will be heard, and at the same time, it will be shown on the LED display.
Then connect your phone's bluetooth to the speakers to play music, and the two speakers will play mu-
sic at the same time.
You must have a speaker with TWS function to use it.
Installation and Location
When using this product, always install it in a dry and ventilated place.
This product is suitable for indoor and outdoor use.
Keep it away from heat sources.
Keep out of direct sunlight.
Keep the speaker away from splashes and drops of water.
The battery is important and needs special attention
Switch off the device before charging the battery.
The estimated charging time is 2 hours.
Charge the device when the sound is weak or jammed.
You must charge the device before the battery capacity is exhausted.
16 15 14 13 12 11
17
18
19
20
21
22
23
24
18
English
1
2
3
4
5
6
7
8
9
10
infiniton.es
Publicidad
