Status/Message; Mdc Repeater Access (Rac); Trunking Functions; Sending A Call Alert Page - Motorola MCS 2000 II Manual Del Usuario

tone. (If no dial tone sounds, press the HOME button
(3) or the telephone interconnect button (7) to hang
up.) Now press the select button (13) or the PTT (F).
The radio then transmits the number.
The call is then handled as described under "Sending
a Telephone Call" above.

Status/Message

Select the menu STATUS or MESSAGE as previously
described. The last acknowledged status or the first
message will be displayed. Use the mode selector (D)
to scroll through the lists of possible statuses or mes-
sages. When the display shows the desired status or
message, press the select key (13) to transmit the sta-
tus or message. Four beeps will sound to indicate that
the status or message has been received. The radio
will automatically exit the status/message feature. If
the status or message is not received, the radio will
display
model III
NO ACKNOWLEDGE
STATUS 1
and generate a continuous tone. Press the select (13)
key to transmit the status or message again or press
the home key (3) to exit the feature.
MCS 2000 Models II & III
English
model II
NO ACKNOWLEDGE

MDC Repeater Access (RAC)

MDC repeater access will select a repeater for trans-
mission. Consult your system administrator for more
information.

Trunking Functions

Sending a Call Alert Page

Select the menu PAGE as previously described, then
either enter the ID via the keypad or use the mode
selector (D) to display the desired ID from the ID list.
Press the PTT (F) or the select button (13) to send the
Call Alert Page.
The call alert page acknowledgement tone is heard if
the called radio receives the call alert page. If the page
is not received the display will show
NO ACKNOWLEDGE
ID: 700001
Press the home button (3) or the menu button (9) twice
to return to the home display.

Receiving a Call Alert

When a call alert is received, the call alert received
tone is heard, the green LED and the
the display until the Call Alert is acknowledged by
NO ACKNOWLEDGE
icon flash in
68P81083C10-C
page 15