Publicidad
Idiomas disponibles
Idiomas disponibles
About copy and layout features and options
●
About paper
●
About HP support
●
Legal notices
© Copyright 2022 HP Development Company, L.P.
Edition 1, October 2022
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statement accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
You can find the Declaration of Conformity by searching for BCLAA-1915 (HP HD
Pro 2 42-in Scanner) or BCLAA-2105 (HP SD Pro 2 44-in Scanner) on the HP website:
http://www.hp.eu/certificates.
Safety precautions
Before using your scanner, read the following safety precautions to make sure you
use it safely.
Do not carry out any operations or procedures other than as described in this
document, because doing so may result in death, serious personal injuries, or fire.
Mains connection
Precautions relating to the scanner's electrical power connection.
Use the power supply voltage specified on the label. Avoid overloading the
●
scanner's electrical outlet with multiple devices. Doing so can cause a fire or
an electric shock hazard.
Ensure that the scanner is well grounded. Failure to ground the equipment
●
may result in electrical shock, fire, and susceptibility to electromagnetic
interference.
Use only the power cord supplied by HP with the scanner. Do not damage, cut,
●
or repair the power cord. A damaged power cord can cause fire or electric
shock. Replace a damaged power cord with an HP-approved power cord.
2
Chapter 1 HP SD/HD Pro 2 44-in Scanner Introductory Information
Publicidad
