Descargar Imprimir esta página

cecotec CONGA 999 ORIGIN X-TREME Manual De Instrucciones página 56

Ocultar thumbs Ver también para CONGA 999 ORIGIN X-TREME:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
ENGLISH
6. TROUBLESHOOTING
Beeps
Error
1
Low battery
Drive wheel fault.
2
Side brush error.
3
Suction motor
error.
4
Main-brush fault.
5
Bumper error.
Fall-detection
sensor error.
Main brush error.
6
Charging error.
7. TECHNICAL SPECIFICATIONS
Conga 999 Origin X-Treme / X/ T/ S/ M
Product reference: 05866/ 08078/ 08079/ 08080/ 08081
Input: 19V DC 0.6 A
Battery: 14.8 V DC Li-ion 2000mAh
56
CONGA 999 ORIGIN X-TREME
Solution
Place the robot in the charging base.
Check if the drive wheel is blocked.
Check if the side brushes are blocked and clean them.
Check if there are obstructions blocking the air inlet.
Empty the tank.
Clean the filters with a vacuum cleaner or a self-cleaning
brush.
Check if the filters are wet.
Dry the filters in a natural way before using them. Make sure
they are completely dry. If any moisture remains, it could
reach the motor and damage the robot vacuum cleaner.
Check if the main brush is blocked or tangled and clean it.
Carefully clean the sensors with a clean, dry cloth.
Restart the robot vacuum cleaner. To do this, switch the
robot off and on.
Carefully clean the sensors with a clean, dry cloth.
Restart the robot vacuum cleaner. To do this, switch the
robot off and on.
Clean the main brush.
Check if the main brush is installed correctly.
Check if the charging base indicators are on. Otherwise,
contact the official Technical Support Service of Cecotec.
Clean the charging terminals with a clean, dry cloth.
Check if the robot vacuum cleaner beeps when it gets to the
charging base. Contact the official Technical Support Service
of Cecotec.

Publicidad

loading

Este manual también es adecuado para:

Conga 999 origin x-treme xConga 999 origin x-treme tConga 999 origin x-treme sConga 999 origin x-treme m0586608078 ... Mostrar todo