Functional Description; Display Elements - Bosch GMS 120 Instrucciones De Funcionamiento Y Seguridad

Read all instructions. Failure to follow all instructions listed below may
WARNING
!
result in electric shock, fire and/or serious injury.
The detector's ability to detect objects
is affected by the proximity of other
equipment that produce strong magnetic
or electromagnetic fields, and by moisture,
metallic building materials, foil-laminated
insulation materials and/or conductive
wallpaper.
The detector 's ability to detect wood
substructures (studs) is also affected by
inconsistency on the thickness of the surface
material, such as plaster and lath.
It is possible that there may be metal, wood
or wiring or something else, such as plastic
pipes, beneath the scanned surface that is
not detected.
Optimal operation of the detector is possible only when the operating instructions and
information are read completely, and the instructions contained therein are strictly
followed.
INTENDED USE
The detector is intended for the detection
of metals (ferrous and non-ferrous metals,
such as pipes, metal studs and rebar), wood
studs and joists, and "live" wires/conductors
in walls, ceilings and floors.
PRODUCT FEATURES
The numbering of the product features
shown refers to the illustration of the detector
on the graphic page 2.
1
Illuminated ring
2
Marking opening
3 Display
4
Operating mode indication
5 On/Off button
6 Display-illumination button
7
Audio signal button
8
"Live" wire detection mode button
9 Metal detection mode button
10 Wood and metal detection mode
11
Contact pads
Safety Rules for Detector
SAVE THESE INSTRUCTIONS

Functional Description

SAVE THESE INSTRUCTIONS
-5-
T h e
WARNING
!
should not be relied on
exclusively to locate items below the
scanned surface. The
also represent water-filled plastic pipes.
Use other information sources to help locate
items before penetrating the surface. Such
additional sources include construction
plans, visible points of entry of pipes and
wiring into walls, such as in a basement, and
standard 16" and 24" stud spacing practices.
B e f o r e p e n e t r a t i n g a
WARNING
!
surface (such as with
a drill, router, saw or nail), always shut
off the electrical power, gas and water
supplies. Cutting, drilling, etc... into these
items when operational can result in personal
injury.
12 Sensor area
13 Name plate
14 Battery lid
15 Latch of battery Lid
16 Fixture for carrying strap
17 Protective pouch
18 Carrying strap

DISPlAy ElEmENTS

a Switched-off audio signal indicator
b Warning function indicator
c Non-metal object indicator i.e. wood or
water-filled plastic pipes
d Non-magnetic metal indicator
e Magnetic metal indicator
f "Live" wire indicator
g Temperature warning indicator
h Battery indicator
i Main detection indicator
j Fine scale indicator
k CENTER indicator
d e t e c t o r a l o n e
on display may