Pioneer DJM-800 Manual De Instrucciones página 11

2. Channel select display section
The <CH SELECT> indicator lights constantly, and a red frame
lights around the number position corresponding to the
chosen effect channel selector.
3. Parameter display section
<PARAMETER>:
The <PARAMETER> indicator lights constantly.
AUTO/TAP:
[AUTO] lights when the BPM measuring mode is set to AUTO,
and [TAP] lights when the BPM measuring mode is set to
manual (TAP).
BPM counter display (3 digits):
In AUTO mode, displays the automatically detected BPM value.
If the BPM count cannot be detected automatically, the display
will flash at the previously detected value. In manual (TAP)
mode, displays the BPM value designated by TAP input, etc.
BPM:
Lights constantly.
MIDI:
Displays the MIDI start/stop status.
¶ Indicator lights after MIDI start command has been sent.
¶ Indicator goes out after MIDI stop command has been sent.
1 Effect display
Effect
Upper/
selector
Effect name
Lower
DELAY Upper DELAY
Lower
ECHO Upper ECHO
Lower
REV DLY Upper REVERSE
Lower DELAY
PAN Upper PAN
Lower
TRANS Upper TRANS
Lower
FILTER Upper FILTER
Lower
FLANGER Upper FLANGER
Lower
PHASER Upper PHASER
Lower
REVERB Upper REVERB
Lower
ROBOT Upper ROBOT
Lower
CHORUS Upper CHORUS
Lower
ROLL Upper ROLL
Lower
REV ROLL Upper REVERSE
Lower ROLL
SND/RTN Upper SEND/
Lower RETURN
NAMES AND FUNCTIONS OF PARTS (DISPLAY SECTION)
Parameter 1 display (5 digits):
Displays parameters designated for each effect. When the beat
select buttons (BEAT 2, 3) are pressed, the corresponding
beat multiple change is displayed for one second. If the beat
select buttons (BEAT 2, 3) are used to designate a value
outside the parameter range, the current number will flash
but will not change.
Unit Display (%/ms):
Lights in accordance with the unit used for each effect.
4. Beat display section
Displays the location of parameter 1 relative to BPM (1/1 beat).
The lower row is lighted constantly. When the parameter 1
location approaches a threshold value, the corresponding
indicator is lighted. When the parameter 1 is between
threshold values, the indicator flashes. Although the display
includes seven actual indicators, the two ends can also be
considered to act as indicators, with the result that a
theoretical nine positions can be postulated. When the values
are at the two ends, no indicators light.
3 Parameter display
Minimum Maximum
Default
value value
1 4 000 500
1 4 000 500
10 4 000 500
10 16 000 500
10 16 000 500
10 32 000 2 000
10 32 000 2 000
10 32 000 2 000
1 100 50
–100 100 0
10 32 000 2 000
10 4 000 500
10 4 000 500
4 Beat display
1 2 3 4
Unit
ms 1/8 1/4 1/2 3/4
ms 1/8 1/4 1/2 3/4
ms 1/8 1/4 1/2 3/4
ms 1/16 1/8 1/4 1/2
ms 1/16 1/8 1/4 1/2
ms 1/4 1/2 1/1 2/1
ms 1/4 1/2 1/1 2/1
ms 1/4 1/2 1/1 2/1
% 10 20 30 40
% — –100 –66 –50
ms 1/4 1/2 1/1 2/1
ms 1/16 1/8 1/4 1/2
ms 1/16 1/8 1/4 1/2
Shaded items
5 6 7 8 9
1/1 2/1 4/1 8/1 16/1
1/1 2/1 4/1 8/1 16/1
1/1 2/1 4/1 8/1 16/1
1/1 2/1 4/1 8/1 16/1
1/1 2/1 4/1 8/1 16/1
4/1 8/1 16/1 32/1 64/1
4/1 8/1 16/1 32/1 64/1
4/1 8/1 16/1 32/1 64/1
50 60 70 80 90
0 26 50 100 —
4/1 8/1 16/1 32/1 64/1
1/1 2/1 4/1 8/1 16/1
1/1 2/1 4/1 8/1 16/1
are not displayed.
11
<DRB1392>
En