About Midi Connectors; Connecting Microphone And Headphones; Connecting The Power Cord - Pioneer DJM-700-S Manual De Instrucciones

CONNECTIONS

ABOUT MIDI CONNECTORS

See P. 21 regarding the functions of MIDI connectors.

CONNECTING MICROPHONE AND HEADPHONES

Microphone
A microphone with XLR-type plug can be connected to the MIC 1
connector on the Operation Panel (upper) .
The MIC 2 jack on the connection panel can be used to connect a
microphone with Ø6.3 mm phone plugs.
• When using a microphone, set the operating panel's MIC switch
to [ON] or [TALK OVER], and adjust the LEVEL dial as
necessary.
When not using a microphone, it is recommended to set the
MIC switch to [OFF] and rotate the LEVEL dial fully
counterclockwise to the [–∞] side.
Microphone 1
Microphone 2
MIDI OUT

CONNECTING THE POWER CORD

Connect the power cord last.
• After completing all other connections, connect the power plug to an ordinary AC outlet.
8
En
MIC1 LEVEL
MIC2 LEVEL
HI
MIC 2
-12
LOW
-12
MIC
OFF ON
FADER START
CH-1
Headphones
The PHONES jack on the upper surface of the operating panel can
be used to connect headphones with a Ø6.3 mm stereo phone
plug.
Headphones
MIC1
OV
1
0
7
4
2
1
0
0
–
–
–
–
–
+12
EQ
–
–
–
d
+12
TALK
OVER
CH-2
HEADPHONES
MONO SPLIT STEREO
MIXING
CUE MASTER
LEVEL
0
PHONES