Descargar Imprimir esta página

EuroLite TB-3 DMX-Roller Manual Del Usuario página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

Before rigging make sure that the installation area can hold a minimum point load of 10 times the projector's
weight.
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Mount the projector with the mounting-bracket to your trussing system using an appropriate clamp. The hole
in the mounting bracket has a diameter of 10 mm.
For overhead use, always install a safety-rope that can hold at least 10 times the weight of the fixture. You
must only use safety-ropes with screw-on carabines. Pull the safety-rope through the hole in the mounting-
bracket and over the trussing system etc. Insert the end in the carabine and tighten the safety screw.
Adjust the desired inclination-angle via the mounting-bracket and fix the fixation screws.
Before taking into operation for the first time, the installation has to be approved by an expert!
Master/Slave-operation
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the TB-3 you can find an XLR-jack (DMX Out) and an XLR-plug (DMX In), which can be
used for connecting several devices.
Choose the device which is to control the effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a balanced microphone lead.
Connect the DMX OUT-jack with the DMX IN-plug of the next device.
Occupation of the DIP-switches:
ON
1 2 3 4 5 6 7 8 9
Projector 1
MASTER
Blackout control
Blackout-socket
If you wish to lock the light output - e.g. via an optional footswitch (Blackout-mode), connect your footswitch
via a mono-jack plug to the Blackout-socket.
All manuals and user guides at all-guides.com
DANGER OF FIRE!
DANGER TO LIFE!
ON
1 2 3 4 5 6 7 8 9
Projector 2
Slave 1
Occupation mono 1/4" jack-plug:
Tip
Sleeve
In Phase (+)
20
ON
1 2 3 4 5 6 7 8 9
Projector 3
Slave 2
Ground
ON
1 2 3 4 5 6 7 8 9
Projector 4
Slave 3

Publicidad

loading