Songmics LSD015 Instrucciones De Montaje página 18

Press and hold the "M4"
button for about 10
seconds until you hear it
beep 2 times. It will
display "S1". Use the " "
or " " button to change
the sensitivity
18
S-1
Set the Measurement of Desk
Height
S-2
Reserved Function
S-3
Upward Anti-Collision Sensitivity
(current detection mode)
S-4
Downward Anti-Collision Sensitivity
(current detection mode).
S-5
Display the Lowest Desk Height
S-6
Memory function
S-7
Overheating Protection
S-8
Reserved Function
Press "M4" to return to the height display
menu, and it is set successfully.
0 cm
Press "M4"
1 inch
0
1
Press "M4"
8
0 Off
Press "M4" 1 Lowest sensitivity
8 Highest sensitivity
0 Off
Press "M4" 1 Lowest sensitivity
8 Highest sensitivity
Use the "


" or "



" buttons to adjust the
Press "M4"
desk height, and it will display the height value
0 Press the memory button for height setting,
then release the button to stop it.
Press "M4"
1 Press the memory button, and it will
automatically move to the memory position,
then press any button to stop it.
0 Off
Press "M4"
1 On (If you operate it continuously for 2
minutes, "HOT" is displayed).
0
Press "M4" 1
8
Set multiple functions, press
"M3" to return to the "S-"
menu.