Publicidad
Idiomas disponibles
Idiomas disponibles
6 - Installation
Follow the instructions below to install the PRORC-XXXXLTE Repeater.
1- Install the external antenna at the point where there is signal coverage.(Note: For better functioning of
the repeater, it is indicated that the location has two cell signal bars or at least -70dB of level.)
2- Connect the internal antenna on the connector indicated by the description '' RF OUT ''.
3- Install the Repeater in indoor and secure environment where there is ventilation (do not install the
equipment near other electronic equipment). If there is need to fix the equipment on a wall, you should
follow the suggestions below:
-
Make two holes for the 6 mm bushing.
-
Insert the bushings into the holes.
-
Secure screws partially, leaving out a portion of the bushing.
-
Fit the repeater to the screws already fixed..
132,0 mm
Antena Celular
Alta Ganancia
PQAG-5015LTE
16
Bushing
Screws
Holes
Publicidad
