Publicidad
Idiomas disponibles
Idiomas disponibles
English
THE SCOPE AND SUGGESTIONS FOR USES
Work
Wood
Drilling
Steel
Aluminum
Small
screw
Screw
tightening
Wood
screw
HOW TO SELECT TIGHTENING TORQUE
Cap
position
1
Approximately 9 in-lbs. (10 kg-cm)
3
Approximately 15 in-lbs. (17 kg-cm)
7
Approximately 23 in-lbs. (26 kg-cm)
13
Approximately 35 in-lbs. (40 kg-cm)
17
Approximately 43 in-lbs. (49 kg-cm)
22
Approximately 52 in-lbs. (60 kg-cm)
High speed: Approximately 78 in-lbs.
Low speed: Approximately 320 in-lbs.
NOTE:
The selected content shown in Table 5 indicates the differences according to screw
type, screw size and material used.
CAUTION:
G
While operating the Cordless driver drill, take care not to lock the motor.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
G
Do not tighten too strongly as the screw heads will be damaged.
22
Table 4
Cap position
1 – 22
1 –
Table 5
Tightening torque
(90 kg-cm)(DS12DVB2)
Approximately 78 in-lbs.
(90 kg-cm)(DS14DVB2)
Approximately 96 in-lbs.
(110 kg-cm)(DS18DVB2)
(367 kg-cm)(DS12DVB2)
Approximately 346 in-lbs.
(400 kg-cm)(DS14DVB2)
Approximately 400 in-lbs.
(460 kg-cm)(DS18DVB2)
Suggestions
Use for drilling purpose.
Use the bit and socket matching the screw
diameter.
Use after drilling a pilot hole.
Operation example
Machine screw
tightening.
Screw tightening for
soft wood material.
Screw tightening for
hard wood material.
Thick screw tightening.
When used as a drill.
Publicidad
