Pur Line ZAFIR V 2000 T Manual De Usuario página 15

OPERATION
1
• Connect to power supply, push the ON/OFF (O/I) button to switch on the left side of the appliance. Buzzer will
have a short "D" sound and full screen display will light up for 10 seconds.
Push ON/OFF button again to switch off.
• Press to turn on the heating function.
Note: Button light will go out in 10s if the appliance is not operated. Touch any button to reactivate the button
light.
• Press again to turn off the heating function and put the appliance in standby mode.
Note: The motor will continue to run for a further 15 seconds to remove residual heat from inside the appliance
before switching off.
SET DATE AND TIME:
• The first time the device is used, the icon
• Press and hold the timer button for 3 seconds, the 1 day icon "1 ~ 7" flashes (1=Monday to 7=Sunday). Use +
and - to select the day. Press Timer button to confirm.
• After confirming the day of the week, the hour digits flash, use + and – to set the current hour and confirm
selection with Timer button. Then the minut digits flash, select the current minutes and confirm with Timer
button.
• The display shows he current day of the week and time.
POWER SETTING:
Function
High heating level
Low heating level
Towel heating function
High heating level + Towel
heating function
EN
2 3
6 7
on the display flashes to remind to set the local day and time.
Power
1800W
900W
200W
1800W + 200W = 2000W
13
4 5
1. Pantalla
2. Increase
3. 24h Timer
4. Mode
5. Programr
6. Decrease
7. Towel warmer /
8. Heating power
8 9
9. ON/Standby
Display symbol
Open window sensor
/ WiFi