Pur Line ZAFIR V 2000 T Manual De Usuario página 16

• High heating level (1800W): Press
shown on the display, the unit can now be operated at the highest heating level. Press
low heating level (900W), only one symbol
• Towel heating function (200W): Press
• Full power (2000W): Activate the towel warming function as described above and press the button
turn on the high heating level.
Note: you can choose between the following heating levels: high heating level - low heating level - no power
(1800W - 900W - 0).
WARNING: The glass surface and air outlet bottom will become very hot.
Be careful and avoid touching it.
TEMPERATURE SETTING:
• Use + or – to set temperature (5-40ºC).
• The display will change accordingly. Once the temperature has been set, the setting will be confirmed
automatically in 5 seconds.
Note: Heater will stop heating when ambient temperature reaches the set temperature. When ambient
temperature is 1ºC lower than the set temperature, heater will restart heating.
Note: The set temperature must be higher than the room temperature. Otherwise, the appliance will not start
heating.
WEEKLY PROGRAM:
• When the heater is ON, please press the Mode button to set one of the automatic modes P1 - P2 - P3 - P4 - P5
- UP and confirm your selection with the Prog button.
• P1 - P2 - P3 - P4 - P5 modes are default mode for quick setting
- P1: all day comfort mode
- P2: mode for general family
- P3: mode for working office
- P4: mode for commercial plaza
- P5: mode for family on travel or trip
Week
Mode
day
Anti-frost
1-7 P1
1-5 00:00-06:30 06:30-08:30 08:30-17:00 17:00-22:30 22:30-24:00
P2
6-7 00:00-07:30 07:30-10:00 10:00-12:00 12:00-14:00 14:00-17:00 17:00-22:30 22:30-24:00
1-5 00:00-06:00 06:00-17:00 17:00-24:00
P3
6-7 00:00-24:00
1-7 P4 00:00-06:00 06:00-22:00 22:00-24:00
1-7 P5 00:00-24:00
• UP mode is week timer setting of comfort / anti-frost set by end-user.
Once Prog mode setting is activated, icon "1" (Monday) begin flashing.
• Example 1 - set one or three (at most) time-range at comfortable level, then follow steps as below:
Touch "+" or "-". The display
EN
button to activate the heating function. The symbols
is shown on the display.
button to activate the towel heating function.
Comfort Anti-frost
00:00-24:00
shows number 1 (1st working-hour) and
14
Working mode
Comfort Anti-frost
button to set the
Comfort Anti-frost
flashes. Now you can use the
will be
to