Thrustmaster TX Racing Weel Manual Del Usuario página 8

ATTACHING THE FERRARI 458 ITALIA RACING WHEEL TO ITS BASE
Align the connector locations using the arrows:
Base (1) connector: Arrow pointing upwards
Racing wheel (2) connector: Arrow pointing upwards
Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device's
ring counterclockwise, while holding the racing wheel (2) in position.
Then, tighten the ring as much as you can; to do so, hold the ring in position and rotate the racing wheel
clockwise.
Once you have installed the FERRARI 458 ITALIA racing wheel, rotate it 180° (when facing the wheel,
the FERRARI logo should be upside down) to access the small attachment screw located on the
Thrustmaster Quick Release (12) device. Use a large cross-slot screwdriver to tighten the small
attachment screw (do not use excessive force), turning it clockwise.
Do not use excessive force when screwing the small attachment screw (using a cross-slot
screwdriver)!
Stop turning the screw as soon as you feel some resistance.
7/16