iRobot Roomba RVD-Y1 Manual De Instrucciones página 8

Cleaning
Remove excess clutter from floors before cleaning. Use
EN
your robot frequently to maintain well-conditioned floors.
• Your robot will automatically explore and clean your home. It will
return to the CleanBase at the end of a cleaning job and whenever it
needs to recharge.
• To send the robot back to its CleanBase, tap
pattern will indicate that the robot is seeking the CleanBase.
• When your robot detects an especially dirty area, it will go into Dirt
Detect™ mode, moving over the area multiple times until it senses
that the area has been sufficiently cleaned. The light ring indicator
will flash blue.
• Tap to spot clean a designated area. The robot will
spiral outward about 3 feet (1 metre) and then spiral
inward to end where it started. The light ring indicator
will show a blue spiral.
5 For more information, visit global.irobot.com
Just Press CLEAN
Tap to Start/Pause/Resume
Hold for 3 seconds to end a job
. A blue light ring
About your Automatic Dirt Disposal
While cleaning, your robot will automatically return to the dirt disposal to
empty its bin and recharge as needed.
The dirt disposal's LED indicator will turn solid red when a new bag is needed.
If a clog is detected, the dirt disposal will trigger additional attempts to
automatically clear the clog.
Note: If you place your robot on the dirt disposal by hand, it will not empty
automatically. In this case, use the iRobot HOME App or hold the button
down for 2-5 seconds.