System Build 7924403COM Instrucciones De Montaje página 19

STEP 14
(x4)
6
#A13800
Wall to be
mounted to.
I
K
systembuild.com
With the assistance of another person, locate and mark the studs in the wall that
the cabinet will be mounted to. Mark the location of the studs
with a pencil. Position the wall hanger (K) on the wall and mark the locations of the
studs on the back rail. Drill four 3/16" diameter holes in the wall
hanger (K) at the stud locations. Using a level, attach the wall hanger (K) to the wall
with four screws (7) as shown. It is important that the wall
hanger is mounted to a minimum of at least two studs. With the help of another
person, place the assembled component onto the wall hanger (K)
so the two beveled edges on the back rail (I) and wall hanger (K) mate together.
D
K
6
6
D
19
6
6
You
Tube