Bosch PHS 8667 Instrucciones De Uso página 14

en
Congratulations on purchasing this
Bosch appliance. You have acquired a
high-quality product that will bring you a
lot of enjoyment.
These operating instructions describe a hair
straightener.
Parts and operating
controls
1 Locking device
2 on/off switch
3 Temperature selector +/–
(min 100°C – max 200°C)
4 Display, illuminated
5 LED display for permanent ionisation
6 Sensor button, illuminated
7 Heating plates, flexibly mounted,
with sensor
8 Cord clip
9 Storage bag (heat-resistant)
10 Ionic nozzle
Operation
■ Plug in the appliance and place on the
heat-resistant storage bag.
■ Turn on with switch 2. The preset
t emperature lights up on the display 4.
■ The desired temperature can now be set
using the temperature selector 3 at inter-
vals of 10 between 100°C and 200°C.
■ The appliance heats up, the preset
temperature flashes in the display. The
appliance is ready for use when the
preset temperature is illuminated and no
longer flashing.
Info: The appliance has a memory function.
If the hair straightener is plugged out and
then plugged in again, it automatically acti-
vates the last temperature set.
The hair can be straightened again using
the selected temperature.
10
L U
/
Recommended temperatures for espe-
cially gentle straightening and shine:
Hair type Structure
wavy healthy
wavy damaged
wavy unhealthy
curly healthy
curly damaged
curly unhealthy
very curly healthy
very curly damaged
very curly unhealthy
This information was calculated under
laboratory conditions: settings for your own
hair may vary.
Colour saving: Colour protection and
longer-lasting colour only at temperatures
< 180°C and at the recommended tempera-
tures stated above.
Button lock
To make handling the appliance easier, you
can lock the buttons "+", "–" and Sensor. If
the button lock has been activated, the set
temperature cannot be changed by acci-
dentally pressing the buttons.
■ Set the desired temperature.
■ Press and hold the "–" button for three
seconds.
■ The button lock is activated, and the
display shows the
■ To deactivate the button lock, press
and hold the "–" button again for three
seconds; the button lock symbol
disappears.
Note: The on/off switch 2 can not be
locked.
Recommended
temperature
160°C
150°C
140°C
180°C
160°C
140°C
180°C
160°C
140°C
M
symbol.
M