Descargar Imprimir esta página

ECG MTD 2081 VGSS Manual De Instrucciones página 78

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 144
1) Select the required cooking program, (except the Weight defrost program and Quick start)
2) Press once the Clock/Preset (Clock/Preset) button.
3) Turn the controller to position Menu/Time (Menu/Time) and set the hours to 11:00.
4) Press gain the Clock/Preset (Clock/Preset) button.
5) Turn the controller Menu/Time (Menu/Time) to set the minutes to 11:30.
6) Press once the Clock/Preset (Clock/Preset) button.
Note: After you set the preset do not use other buttons except when you want ot find the preset time Clock/Preset or if you want to cancel
it by pressing Pause/Cancel.
7. Automatic cooking
You do ot have to set power level and cooking time for the following foods. Just enter the type of food and its weight/amount.
Menu
Food
1
Beverages (200 ml/cup)
2
Rice (g)
3
Spaghetti (g)
4
Potatoes (each 230 ± 10 g)
GB
5
Auto heating (g)
6
Fish (g)
7
Chicken (g)
8
Beef/Mutton (g)
9
Ground meat (g)
Example: cooking 400 g of fish
1) Turn the controller Menu/Time (Menu/Time) counterclockwise until the display shows 6 – see the included food table.
2) Press the Weight Adjust (Weight Adjust) button. Press this button until you select the required weight 400 g.
3) Press the Start/Quick Start button.
8. Combination grilling and microwave cooking
The maximum cooking time for both combination modes is 95 minutes. Two combined modes are available: COMBI 1 suitable for cooking
fish and baking (30% microwave cooking, 70% grilling) and COMBI 2 suitable for omelettes, puddings, baked potatoes and poultry (55%
microwave cooking, 45% grilling).
Example: You want to cook in COMBI 1 mode for 21 minutes
1) Press the Combi button once.
2) Turn the controller Menu/Time (Menu/Time) until the display shows time 25:00.
3) Press Start/Quick Start.
Example: You want to cook in the COMBI 2 mode for 12 minutes
1) Press the Combi button twice.
2) Turns the controllerMenu/Time (Menu/Time) until the display shows time 12:00.
3) Press Start/Quick Start.
After the heating is completed, the device will keep the fan running for the time necessary to cool down the thermally stressed parts
of the electronics to prevent damage. If the heating is shorter or if the ambient thermal conditions allow it, the device does not need
to cool down after the heating is completed.
9. Child lock - may vary depending on the type of microwave oven
LOCK: Press the Stop/Cancel (Stop/Cancel) button for 3 seconds, a beep sounds indicating that the child lock is activated and the Child Lock
(Child lock) indicator appears on the display.
UNLOCK: Hold the Stop/Cancel button for 3 seconds, a sound will notify you that the child lock has been deactivated and the time setting
will appear on the display. The lock indicator on the display will go off.
Child lock activation:
In standby mode without any operation the microwave automatically switches to child lock mode within one minute and the indicator light
comes on. All buttons will be deactivated.
To turn off the child lock:
To deactivate the child lock, open and close the microwave oven door.
78
1. When cooking milk/coffee and potatoes, when you press the button Weight
Adjust (Weight Adjust) the display shows the number of portions of the food
instead of weight.
2. In menu programs 7, 8, 9 the program will be interrupted and the beeping
signal will prompt you to turn the food on. Then close the door and press Start/
Quick start (Start/Quick start) to resume cooking.
3. The result of automatic cooking depends on factors such as voltage drops,
shape and size of your food, your personal preference, etc. If you do not find the
cooking result satisfactory, adjust the cooking time accordingly.
4. When cooking spaghetti, add boiling water before cooking.

Publicidad

loading

Este manual también es adecuado para:

Mtd 2080 vgss