Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing Process for Multiple Fans:
Select the desired frequency setting from the
back of the remote control. (Fig 14) You
change the frequency setting by arranging
the small switches numbered 1 through 4
in the up or down position making 16
different frequencies or combinations
possible. Anytime you change the
frequency for a fan you must complete the
pairing process as described above.
Beginning with the power off to all fans,
restore power to the first fan. Select the
desired frequency setting. Complete
the pairing process as described above.
Test the fan for proper operation. Then
power off and move to the next fan.
Restore power to the second fan. Select the
desired frequency setting. Complete
the pairing process as described above.
Test the fan for proper operation.
Repeat this process until all fans have been
paired.
The receiver provides the following
protective function:
1. Lock position: The DC motor has a
built-in safety against obstruction during
operation. The motor will be locked operation
and disconnect power after 30
seconds of interruption. Please remove
obstacles before re-set.
2. Over 80W protection: When the receiver
detects motor power consumption which is
greater than 80W, the receiver power will be
stopped and operation will immediately
discontinue. Turn the receiver power on after
5 seconds.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
NOTE: To operate the reverse function on
this fan, press the reverse button while the
fan is running.
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
Figure 16. This allows you to set your air
conditioner on a higher setting
without affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 17. This allows you to set your
heating unit on a lower setting
without affecting your comfort.
10
Figure 16
Figure 17
Publicidad
