Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2. Starting to Wire Motor
WARNING: To avoid possible electrical
shock, be sure electricity is turned off at the
main fuse box before wiring.
Use the wire nuts supplied with your fan
when making connections. Secure the
connectors with electrical tape and make
sure there are no loose connections or wire
strands.
Step 1. Spread the wires apart so that the
black wire from the fan is on one side of the
mounting bracket and the white wire and
green ground wire are on the other side.
Step 2. (Fig. 8) Connect the BLACK building
supply wire to the BLACK fan wire. Connect
the WHITE building neutral wire to the
WHITE fan neutral wire. Connect the
COPPER building ground wire to the GREEN
fan ground wire.
Step 3. Inside the ceiling junction box be sure
to spread the wires apart so that the black
connection is on one side of the outlet box
and the white/white and green/copper
connections are on the other side.
Step 4. Connect the wiring from the wall
switch receptacle to wall transmitter unit.
● Remove the existing wall plate and switch
from the wall junction box.
● Connect one BLACK wire from the wall to
one BLACK wire (labeled "TO FAN") from the
wall transmitter.
● Connect the other BLACK wire (labeled
"TO POWER SUPPLY") from the transmitter
to the remaining BLACK wire from the wall
(A/C supply source).
● If your junction box has a ground wire
(green or bare copper), connect the
transmitter's ground wire to it. Otherwise,
connect the transmitter ground wire directly to
one of the screws from the outlet box.
● Carefully tuck the connected wires inside
the junction box. Secure the transmitter with
the two screws provided. Attach the face
plate over the transmitter with the two screws
provided.
Step 5. Inside the ceiling junction box be sure
to spread the wires apart so that the black
connection is on one side of the outlet box
and the white/white and green/copper
connections are on the other side.
SUPPLY CIRCUIT
BLACK
BLACK
Wall control
Fan
5
Ground
Conductor
Outlet Box
Green Ground
Lead
Ground to
Downrod
Figure 8
Publicidad
