QiCYCLE TDN09Z Manual De Instrucciones página 7

Switch power-assisted mode
Press the "+" or "-" button on the left side
of the power button to switch among
mode N, 1, 2 and 3, and the power assist
increases with the increase of modes.
When the speed exceeds 25km/h, the
assist will be automatically turned off. N
mode has no power assist.
Press "+/-" button to change mode
Turn on/off lights
Press and hold the "+/-" button to turn
on/off the front and rear lights.
(During bicycle riding,the lights can be
automatically turned on/off according to
ambient light changes)
Press and hold the "+/-" button
to turn on/off the lights
Bluetooth connection
Scan the QR code to
download and open the
"QiCYCLE APP", search for
the device, find Electric Bike
C2, and tap Connect. Once
the connection is finished,
QiCYCLE APP is connected
the Bluetooth indicator on
the display will be shown.
In the power-on state, press
and hold the Walk assist
button to start the boosting
function. The speed does
not exceed 6km/h. Release
the Walk assist button to
stop.
Walk assist button
6