Halo GFLXL150FSUNVDBZSF Instrucciones página 3

ENGLISH
INSTALLATION
1. TURN OFF THE ELECTRICITY
Verify the wall switch is in the OFF position.
•
Turn off power at the circuit breaker that supplies power to the outlet box you are working on.
•
For screw-in type fuses unscrew the fuse that supplies power to the outlet box you are working on.
•
2. ATTACHING THE PHOTOCELL ON THE FIXTURE
Place the photocell (B) onto the receptacle on top of the fixture (A)
•
Twist the photocell (B) in the direction of the arrow indicated on the photocell until it locks into place.
•
CAUTION: Do not try to rotate the photocell receptacle on top of the fixture as it may twist the wiring.
NOTE: The fixture comes with the twist-lock photocell (B) provided separately in the box.
NOTE: The light fixture will not work without the photocell inserted
into the photocell receptacle as it completes the circuit.
NOTE: Make sure the photocell is locked on the receptor. Do not
over rotate after it is locked.
3. PREPARING TO MOUNT THE FIXTURE
NOTE: The fixture comes with the screws already installed on the
fixture arm (C)
Loosen the screws from the arm (C) of the fixture
•
4. MOUNTING THE FIXTURE
Feed supply wires through the arm (C)
•
5. MAKING THE ELECTRICAL CONNECTIONS
If necessary, strip 3/8 in. of insulation from the junction box or fixture (A) wires.
•
ON/OFF WIRING (NON DIMMING) METHOD:
Connect the fixture black wire to the supply black wire ((+) line), and fixture white wire to the supply
•
white wire ((-) common) by twisting the exposed wires together and using the wire nuts (AA). Ensure
there are no loose wires.
Connect the supply ground wire to the green fixture ground wire by twisting the exposed wires
•
together and using the wire nuts (AA)
0-10V DIMMABLE WIRING METHOD:
Connect the fixture black wire to the supply black wire ((+) line), and fixture white wire to the supply
•
white wire ((-) common) by twisting the exposed wires together and using the wire nuts (AA). Ensure
there are no loose wires.
Connect the supply ground wire to the green fixture ground wire by twisting the exposed wires
•
together and using the wire nuts (AA).
Connect the purple wire to the (V+) DIM wire and the pink wire with (V-) DIM wire by twisting the
•
exposed wire together and using the wire nuts (AA).
Non-Dimming Wiring Diagram
(+) Line
(-) Common
Ground
LED Flood light Instructions
WARNING: Risk of electric shock. Disconnect power
at fuse or circuit breaker before installing or servicing.
3/8 in.
Black
Lighting
White
Fixture
Green
www.cooperlighting.com
0−10V Dimming Wiring Diagram
Black
(+) Line
White
(-) Common
Purple
(+)DIM V+
Pink
(-)DIM V-
Green
Ground
IL51847822
1
2
B
A
3
4
5
Lighting
Fixture
3