riptunes WAV-110 Guia Del Usuario página 6

SETTING THE ALARM
I. SET THE ALARM TIME
This clock has two alarms that can be set. To set the alarm:
1. Press the
alarm display. Press (-/+) to select the hour for the alarm.
2. Press again. The minute will flash on the display.
Press (-/+) to select the minute.
3. Press the
Alarm 2 is set in the same way, using the
II. SET THE ALARM DAY
Make sure you have set the correct time and day set from the previ-
ous section so that the alarms go off on the correct day and time.
III. SET THE ALARM VOLUME
The VOL switch on the top of the clock sets the volume
for both alarms.
VIBRATION SETTING
Make sure the bed shaker is connected to the back
of the clock, then slide the vibration switch on the
top of the clock to the desired vibration intensity for
when the alarm goes off.
button to set ALARM 1. The hour will flash on the
button to set the alarm and exit the alarm setup.
On the back of the clock, there are switches
to set the day for each alarm. Each of the
two alarms have 3 pre-set day options for
Mon-Sun (every day), Mon-Fri (weekdays),
and Sat-Sun (weekend).
button instead.
–6–