Sauder Hammond Serie Instrucciones De Montaje página 25

Step 20 Step
å
Fasten the DOORS (M) to the ENDS (B and E). Use sixteen BLACK 5/8" FLAT HEAD SCREWS (22).
å
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), turn the adjusting screw in or out.
å
To adjust the DOORS up and down (vertical), loosen four vertical adjustment screws. Move the DOORS up or down to the
desired location. Tighten the screws after making adjustments.
å
To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Mounting screw (depth)
(vertical adjustment)
B
428247
Adjusting screw (horizontal)
M
BLACK 5/8" FLAT HEAD SCREW
(16 used in this step)
www.sauder.com
E
M
22
Page 25