Sauder Cannery Bridge Serie Instrucciones De Montaje página 21

Step 16
å
Refer to the enlarged diagram to identify the parts on
the HINGE.
å
The DOOR may need some adjustments. Follow the
text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal),
turn the adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen
both vertical adjustment screws. Move the DOOR up
or down to the desired location. Tighten the screws
after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the
mounting screw one turn and move the DOOR in
or out, as needed. Tighten the mounting screw after
making adjustments.
429515
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/service
17
Adjusting screw (horizontal)
Page 21