Sauder Cannery Bridge Serie Instrucciones De Montaje página 27

Step 21
å
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOOR may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both vertical adjustment screws. Move the DOOR up or down to the desired
location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
431315
Adjusting screw (horizontal)
www.sauder.com/service
Mounting screw (depth)
(vertical adjustment)
Page 27